An electrical heater within the injector is energized by the
vehicle controller, rapidly heating the ethanol fuel and dramatically improving
vaporization while reducing emissions.
Ink materials used in construction of the heater, body design, the
ink-printing process on the body, and overmolding with PPA (which was designed for flow,
heat resistance, and electronic compatibility) were all key to the success of
this application. The technology saved $60 USD/vehicle as well as 8.8 kg, while
improving cold starts on E100 fuel and eliminating the need for a redundant
gasoline fuel system on the vehicle.
OEM/Vehicle
Honda Motor Co.
2015 Honda Fit
and Honda City
System Supplier
Delphi Powertrain
Material Processor
Delphi Powertrain
|
Material Supplier
DuPont
Automotive
Resin
Zytel HTN54G35EF High
Temperature Nylon
Tooling/Equipment Supplier
Baldi
|
For More Information See: http://www.plastics-car.com/Todays-Automobiles/Automotive-Powertrains/Drive-Shaft.html
To use your car with a new fuel injector , you need to reprogram the ECU. The time of opening and closing of injectors are controlled by ECU. Your car engine should neither run too lean or too rich. You can ensure this by installing a piggyback fuel computer along with air/fuel ratio gauge. The system will provide you feedback on the readings so that you can spot the trouble before it gets out of hand.
ReplyDeleteThe use of HPI high-performance injectors will upgrade your fuel system efficiently increasing the reliability, power, and efficiency of your car engine. You can hire professional services to ensure that your car is calibrated for high performance.