Popular Posts

Showing posts with label Nissan. Show all posts
Showing posts with label Nissan. Show all posts

Thursday, February 16, 2017

Blow-Molded Grille Reinforcement


This blow molded grille reinforcement adds stiffness to the chromed ABS grille assembly to meet OEM load/deflection and sightline/aesthetic requirements. The 20% GR-PP part assembles to the B side of the grille assembly within manufacturing tolerances yet meets thermal expansion/contraction characteristics of the grille without affecting the design profile by remaining hidden. Deflection under load for the unreinforced grille was reduced by 66%, while cost and weight were each reduced by 25% vs. a stamped steel reinforcement solution. A single parison is dropped, and excess material is punched out and then reprocessed to form subsequent parts.

OEM/Vehicle
Nissan Motor Co. Ltd.
2016 Nissan Titan
System Supplier
SRG Global
Material Processor
   Metelix Products Inc.
Material Supplier
Washington Penn Plastics Co, Inc.
Resin
PPC1GF2UV-RXF 20% GF PP
Tooling/Equipment Supplier
Metelix Products Inc. 

Tailgate Gap Hider Assembly


This tailgate gap hider provides a structural "bridge" over the gap between the end of the pickup bed and the open tailgate, reducing debris intrusion and withstanding heavy loads without breakage or deformation during loading and unloading.  The spring-loaded unit offers 2 installation options and deploys and stows automatically during tailgate operation. A blow molded 20% glass-reinforced PP copolymer reduces mass 20% vs. structural steel solutions and offers better performance than non-structural aftermarket offerings. Special coarse texturing helps match the gap hider to spray-on bed liners while improving surface scratch resistance.

OEM/Vehicle
Nissan Motor Co. Ltd.
2016 Nissan Titan
System Supplier
Metelix Products, Inc.
Material Processor
   Metelix Products, Inc.
Material Supplier
Washington Penn Plastics Co, Inc.
Resin
PPC1GF2UV-RXF 20% GF PP
Tooling/Equipment Supplier
Metelix Products, Inc.

For More Information See: http://www.plastics-car.com/structure

Monday, December 8, 2014

Trunk Lid


This is the first commercial application of the prepreg compression molding (PCM), a rapid (2-4 minute) out-of-autoclave processing option for CFRP composite parts that can be used on conventional compression-molding presses. The finished decklid inner and outer achieve excellent Class A surface quality right out of the tool and are bonded after molding. Parts provide excellent mechanical properties and save 40% of the mass of the previous aluminum parts and 50% of the cost of autoclave cured CFRP parts.
OEM/Vehicle
Nissan Motor Co., Ltd.
2014 Nissan GT-R sports car
System Supplier
Chiyoda Manufacturing Corp.
Material Processor
Challenge Co. Ltd.
Material Supplier
Mitsubishi Rayon Co., Ltd.
Resin
Pyrofil prepreg TR361 E250S Rapid cure epoxy resin
Tooling/Equipment Supplier
Yasuda Moldtec Inc. 

Monday, December 2, 2013

Instrument Panels with Injection-Molded Skin


This is the world's first instrument panel featuring an injection-molded thinwall skin in ultrahigh-flow TPV (meltflow rate of 250 g/10 min).  Thanks to excellent mechanical properties, the 1-mm skin could accommodate deep draws and uneven undercuts, providing new levels of design and styling. The material provides superior visual appeal, distinctive elongation, and softer touch preferred by consumers without compromising airbag deployment. Versus PVC slush molding, the TPV provides good long-term appearance and gloss levels, molds in just 60 sec, is 25% lighter and 10% less costly.  Tooling costs are lowered and scrap is reusable.

OEM/Vehicle
Nissan Motor Co.
2013 Sentra compact car
System Supplier
Calsonic Kansei Corp.
Material Processor
Calsonic Kansei Corp.
Material Supplier
Asahi Kasei Chemicals
Resin
SUNVIEO A7171 TPV
Tooling/Equipment Supplier
Calsonic Kansei Corp. 


Lithium-Ion Battery Pack


The innovative design of this EV battery-pack system allowed for maximum energy density through a structural thinwall design and use of a space-saving passive air-cooling approach. This leads to greater battery-module package density by increasing battery cell count/pack, which in turn provides greater EV battery capacity and electric driving range. Safe passive cooling improved long-term durability of the battery, eliminated leak paths (associated with liquid-cooling approaches), and reduced cost ($500 USD/vehicle) and weight (15-20%) vs. forced-air or active liquid-cooled batteries. Conductive adhesive efficiently transfers heat from the battery to metal walls of each module. Pouches and adhesives are overmolded and supported by dimensionally precise spacers and holders injection molded from ULÃ’94 V-0 compliant, neat M-PPE, whose precise tolerances and snap-fit designs allow for automated process assembly. Halogen-free flame retardance helps improve passenger safety, complement the environmental benefits of BEVs.

OEM/Vehicle
Nissan Motor Co.
2013 LEAF EV
System Supplier
Automotive Energy Supply Corporation (AESC)
Material Processor
Piolax Corp.
Material Supplier
SABIC
Resin
NORYL N1150 MPPE

All-Olefinic Liftgate

This liftgate is unique in that all materials are fully olefinic (hence, fully recycleable at end of vehicle life) and it features North America's first TPO outer panel.  The full assembly features unique styling vs. conventional stamped steel and is 30% lighter than comparable steel systems, improving fuel efficiency (by 10%). Lower weight also improves CO2 emissions and customer usage, since less effort is required to open/close a lighter liftgate.  Thanks to parts integration, low scrap, and reuse of offal possible with injection-molded thermoplastics, raw-material costs on the outer panel were reduced 35% vs SMC. Use of a high-flow, high-stiffness, high-impact TPO formulation reduced molding cycles vs. SMC and traditional TPO compounds for the painted Class A outer panel.  Use of MIC color LGF-PP met mechanical requirements and eliminated paint on the Class A inner panel, reducing VOC emissions. Both panels were joined via a structural adhesive for which they were formulated to have an affinity.

OEM/Vehicle
Nissan Motor Co.
2014 Rogue CUV
System Supplier
Hitachi Chemical
Material Processor
Magna-Decostar
Material Supplier
LyondellBasell
Advanced Composites, Inc.
Resin
Hifax 1175P TYC
Mostran L5091-P PP
Tooling/Equipment Supplier
Kyowa Industrial Co., Ltd. 

Wednesday, November 21, 2012

Water Outlet Assembly


The combination of sequencing, precision timing, multi-slide actions, scientific molding, and robotics resulted in a world-class water-outlet assembly injection molded in glass-reinforced PPA. This metal-to-plastic conversion, whose main function is to act as a manifold for the cooling system, integrated 2 components into 1 assembly, which features 10 seamless barb ports that feed coolant to and from the transmission cooler, throttle cooler, heater core, oil cooler, and provides coolant to the radiator.  The outlet also includes a press-in-place seal, sealed threaded insert, a wire harness bracket, an oil drip rail, plus it houses the thermostat.  The 10 male ports are created without a parting line, which is usually required with conventional injection molding, and are made possible through precision timing of multiple valve gates and multiple slide actions to properly form this complex product.
OEM/Vehicle
Nissan Motor Co. Ltd.
2012MY Nissan Altima
System Supplier
MPC, Inc.
Material Processor
MPC, Inc.
Material Supplier
Solvay Specialty Polymers
Resin
AMODEL AS-1933HS PPA-GF33
Tooling/Equipment Supplier
Industrial Molds Group 

For More Information See: http://www.plastics-car.com/Todays-Automobiles/Automotive-Powertrains

Wednesday, May 23, 2012

Electric Water Valve Assembly


This is the first single-package, multi-function, under hood, water-valve assembly that uses over molded joints to delivery better heat and AC performance.  System provided 58% less pressure drop, 42% less internal leakage, 33% higher flow, and 17% less external leakage, all at 40% lower weight and 15% lower costs.

OEM/Vehicle
2005 Nissan® Titan ® pickup /
Armada®  SUV / Quest ® minivan by
Nissan Motor Co.
System Supplier
Cooper-Standard Automotive
Material Processor
Klum
Material Supplier
DuPont Automotive
Resin
Zytel ® HTN 51G35 HSLR PPA
Tooling/Equipment Supplier
Klum

For More Information See: http://www.plastics-car.com/Todays-Automobiles/Automotive-Powertrains/Transmissions.html?css=print

Transmission Thermal Valve Assembly


This is the first transmission by-pass valve with plastic poppet utilizing a patented, overmolded metal-to-plastic joint, which eliminates costly fittings and components, metal crimping, and welding processes.  The application produced a 50% weight and 30% cost savings, while improving performance and reducing leaks.

OEM/Vehicle
2006 Nissan® Sentra® compact car by
Nissan Motor Co.
System Supplier
Cooper-Standard Automotive
Material Processor
Calico
Material Supplier
DuPont Automotive
Resin
Zytel ® HTN 51G35 HSLR PPA
Tooling/Equipment Supplier
Lutman Precision Mold

For More Information See: http://www.plastics-car.com/Todays-Automobiles/Automotive-Powertrains/Transmissions.html

Trunk Divider Panel



This is the first mid-trunk modular / removable divider system for a passenger vehicle application.  The panel forms 2 compartments in the trunk (one hidden), has integral hooks for grocery bags, provides fold-flat design for wet / dirty item storage, and is removable for use outside vehicle. This solution met all cost, mass, performance, design, and functional requirements.

OEM/Vehicle
2007 Nissan ® Sentra ® compact car
by Nissan Motor Co.
System Supplier
Meridian Automotive Systems
Material Processor
Meridian Automotive Systems
Material Supplier
Meridian Automotive Systems
Resin
SMC
Tooling/Equipment Supplier
Radiance Mold

For More Information See: http://www.plastics-car.com/Todays-Automobiles/Auto-Interior

Electric Brushless Pump


This is the first brushless pump with MMT motor-control technology and overmolded integrated brackets.  The lightweight, compact packaging increased the life expectancy for pump thanks to special hydrolysis- and ethylene glycol-resistant resin.  The pump delivers 8% higher performance in flow at 53% of the size, 33% of the mass (vs. metal brush pumps), and at lower cost ($2.3 million saved over 3 years), while increasing cabin comfort and improving vehicle fuel efficiency.

OEM/Vehicle
2006 Nissan ® Quest ® minivans by
 Nissan Motor Co.
System Supplier
Cooper-Standard Automotive
Material Processor
Calico
Material Supplier
DuPont Automotive
Resin
Zytel ® HTN 51G35 HSLR PPA
Tooling/Equipment Supplier
Lutman Precision Mold

For More Information See: http://www.plastics-car.com/Todays-Automobiles/Car-Fuel-Systems